(LS) Sunix USB2312 USB 3.1 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great
27%
Sunix USB2312 USB 3.1 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle Sunix

(LS) Sunix USB2312 USB 3.1 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle

Available:Out of Stock
Product Details
  • Warranty : 12 Months
  • Width : 202 mm
  • Length : 174 mm
  • Height : 44 mm
$72.00 $99.00
Successful pre-order.Thanks for contacting us!
Secure

Sunix USB2312 USB 3.1 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle

PCI Express Base Specification Revision 2.0 dual-lane (x2).
Compliant with Universal Serial Bus 3.1 specification Gen2.
Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices.
Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
Expands dual external USB 3.1 Super-Speed plus Type-A ports on the system.
USB port supplies maximum +5VDC / 900mA power output to USB device.


Specifications
Hardware
BUS PCI Express Spec 2.0, Dual-Lane (x2)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System
USB Communication
Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.1 USB Type-A port
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge
Power
Source PCIe Bus Power
Output Capacity USB Type-A Port:
+5VDC / Maximum 0.9A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-A Port:
+6VDC / 1.1A / each port / PTC Fuse
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)
Driver Support
Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)
Regulatory Approvals
EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE
Physical Characteristics
PCB Dimension 79.3 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Sunix USB2312 USB 3.1 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle

PCI Express Base Specification Revision 2.0 dual-lane (x2).
Compliant with Universal Serial Bus 3.1 specification Gen2.
Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices.
Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
Expands dual external USB 3.1 Super-Speed plus Type-A ports on the system.
USB port supplies maximum +5VDC / 900mA power output to USB device.


Specifications
Hardware
BUS PCI Express Spec 2.0, Dual-Lane (x2)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System
USB Communication
Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.1 USB Type-A port
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge
Power
Source PCIe Bus Power
Output Capacity USB Type-A Port:
+5VDC / Maximum 0.9A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-A Port:
+6VDC / 1.1A / each port / PTC Fuse
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)
Driver Support
Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)
Regulatory Approvals
EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE
Physical Characteristics
PCB Dimension 79.3 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Shipping:
Free Shipping - Free Shipping over $1,000
Estimated Delivery Time:
  • Metro Areas: 4-12 business days
  • Regional Areas: 7-14 business days
Locations: We ship all over Australia. Sydney - New South Wales, Melbourne - Victoria, Brisbane - Queensland, Perth - Western Australia, Adelaide - South Australia, Canberra - Australian Capital Territory (ACT), Hobart - Tasmania, Darwin - Northern Territory

Return & Refund
  • The item must be unused and in the same condition that you received it
  • Returns are accepted within 30 days of delivery
  • For any questions contact, support@goodmayesonline.com.au.
  • Refund will be processed within 2-3 working days post-pickup.