Kingston 16GB (1x16GB) DDR4 UDIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Desktop PC Memory ~KVR26N19D8/16
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great
46%
Kingston 16GB (1x16GB) DDR4 UDIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Desktop PC Memory ~KVR26N19D8/16 Kingston

Kingston 16GB (1x16GB) DDR4 UDIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Desktop PC Memory ~KVR26N19D8/16

Available:Out of Stock
Product Details
  • Warranty : 120 Months
  • Width : 42 mm
  • Length : 138 mm
  • Height : 8 mm
$96.00 $179.00
Successful pre-order.Thanks for contacting us!
Secure

Kingston 16GB (1x16GB) DDR4 UDIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Desktop PC Memory

This document describes ValueRAM's KVR26N19S8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 2G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free

Kingston 16GB (1x16GB) DDR4 UDIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Desktop PC Memory

This document describes ValueRAM's KVR26N19S8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 2G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free

Shipping:
Free Shipping - Free Shipping over $1,000
Estimated Delivery Time:
  • Metro Areas: 4-12 business days
  • Regional Areas: 7-14 business days
Locations: We ship all over Australia. Sydney - New South Wales, Melbourne - Victoria, Brisbane - Queensland, Perth - Western Australia, Adelaide - South Australia, Canberra - Australian Capital Territory (ACT), Hobart - Tasmania, Darwin - Northern Territory

Return & Refund
  • The item must be unused and in the same condition that you received it
  • Returns are accepted within 30 days of delivery
  • For any questions contact, support@goodmayesonline.com.au.
  • Refund will be processed within 2-3 working days post-pickup.